KONTROLLTECHNIK     •     AUSLEITTECHNIK     •     REGELUNGSTECHNIK    •    INSPECTION     •     SORTING & DISTRIBUTION     •     AUTOMATING
Link to the BBULL TECHNOLOGY homepageLink to the BT-Service homepageLink to the BBULL TECHNOLOGY homepageLink to the FEDERSPIEL homepageLink to the PAXONA homepageLink to the BBULL TECHNOLOGY homepageLink to the SYMPLEX homepage
BBULL FR
Vent Tube Detection with Inductive Sensory (max. 60.000 containers per hour)
TECHNICAL PRINCIPLE:
Inductive inspection of the content of glass,
plastic and PET for metallic parts in the content
CONVEYOR:
Max. speed: 1,7 m/sec chain conveyor
(plastic preferable). The objects to be inspected
have to be calmed by a railing and as close as
possible guided to the sensor.
PERFORMANCE:
working distance of the sensor:
object sice: 60 mm on FE
50 mm on stainless steal
min 6 mm (tube)
object lenght: min. 105 mm
material thickness: min. 1,5 mm
The metallic objects have to stand upright on at least 60 mm height in the container
APPLICATION
Depending on the bottle´s diameters different configurations are required:
sensors diameter of bottle
BBULL FR 60 1 up to 60 mm
BBULL FR 100 2 up to 100 mm
BBULL FR 120 2* up to 120 mm
* supersensitive sensors
Vent Tube Detection with Electromagnetic Sensory STRATEC FR
TECHNICAL DATA    
Max system performance in c/h:   60.000
Power supply in V/Hz:
  230/50
Power consumption in VA:
  100
Diameter of the cable in mm²:
  mind. 0,75 , max 1,5
Measurements (WxHxD) in mm.:   300x520x580
Weight in kg:   20
Protection class:   IP 65
Environmental temperature in °C:   10 - 60
Output:   PNP
Direct output of a 24 V signal if metal parts are detected. (The signal can be connected to an alarm (opt./acu.) or can be used to release a conveyor stop (processing by external PLC).
Brochure: BBULL FR < PDF > < download > (approx. 0,2 MB)